microfertile® plant
microfertile® plant is a liquid, organic biostimulant based on a controlled and patented production process. During manufacturing, beneficial, plant-growth-promoting bacteria (including Thiobacillus cultures) produce valuable fermentation metabolites; the final product contains no effective amounts of live microorganisms (below defined tolerance limits).
It combines dissolved, silicified rock (broad spectrum of available trace elements) with Chlorella microalgae (natural sugars and metabolites) as well as other natural ingredients such as organic acids, amino acids, and extracellular polysaccharides (EPS) at a pH of 7–8.
microfertile® plant is designed to support photosynthetic performance and green matter development, improve nutrient efficiency, and increase tolerance to abiotic stress — especially cold and frost stress (depending on the crop and application; various practical experiences exist down to approximately -4 to -6°C).
Cytokinins: iP = isopentenyl adenine, iPR = isopentenyl adenosine, MeS-iP = 2-methylthio isopentenyl adenine, MeS-Z = 2-methylthio zeatin
Auxins: OxIAA = oxo-IAA, I3A = indole-3-aldehyde.
Jasmonates: JA = jasmonic acid.
Phenolics: BzA = benzoic acid, SA = salicylic acid.
Special Effects
- Promotes germination and early emergence
- Supports nutrient status and chlorophyll production
- Can increase green matter production and yield (crop-dependent)
- Promotes plant development and growth
- Supports plant stability and standability
- Improves tolerance to cold and frost stress
Applications
For optimal results, you will find application recommendations for different plants and types of crop here. You can also find application maps for download on our download page.
Foliar application
To increase strength, green biomass, yield and improve photosynthesis: spray a 5% concentration (5 litres of microfertile® plant per 100 litres of solution with chlorine-free water) over the entire plant surface.
Foliar Application:
Spray a concentration of 5% (5 litres of microfertile® plant per 100 litres of solution with chlorine-free water) 2 to 3 times during the tillering phase and the stem elongation phase.
microfertile® plant can be used together with herbicides, fungicides, insecticides, liquid fertilisers or ekofertile® plant – however, we cannot accept any liability.
Foliar Application:
To increase cold and frost resistance (increase of systemic resistance – users report about efficiency on different crops down to minus 4, 5 and 6°C) and to improve photosynthesis, apply a 5% concentration (5 litres of microfertile® plant per 100 litres of solution with chlorine-free water) by spraying over the entire area on leaves at least 24 hours before the expected frost (the effect lasts up to 10 days; note that wind increases the plants´ perceived cold). Antifrost proteins are then converted into oils, vitamins and proteins, increasing the quality and yield of the vegetable.
Foliar Application:
To increase cold and frost resistance (increase of systemic resistance – users report about efficiency on different crops down to minus 4, 5 and 6°C) and to improve photosynthesis: spray a 5-10% concentration (5 to 10 litres of microfertile® plant per 100 litres of solution with chlorine-free water) at least 24 hours before the expected frost over the entire surface on leaves anytime during the growth stage or in early spring (the effect lasts up to 10 days; note that wind increases the plants´ perceived cold). Antifrost proteins are then converted into oils, vitamins and proteins, increasing the quality and yield of the fruits.
Irrigation:
5% concentration of ekofertile® plant and 5% microfertile® plant (5 l of each product per 100 l of solution with chlorine-free water) applied 3-4 times at regular intervals during the growth phase.
Foliar Application:
Spraying with 5% concentration of ekofertile® plant and 5% concentration of microfertile® plant (5 liters of each product per 100 liters of solution with chlorine-free water) applied 3-4 times at regular intervals during vegetative growth.
Foliar Application
To protect against frost (increase of systemic resistance – users report about efficiency on different crops down to minus 4, 5 and 6°C) and to improve photosynthesis, apply a 10% concentration (10 litres of microfertile® plant per 100 litres of solution with chlorine-free water) by spraying over the entire area on leaves, flowers and buds at least 24 hours before the expected frost (the effect lasts up to 10 days; note that wind increases the plants´ perceived cold). Antifrost proteins are then converted into oils, vitamins and proteins, increasing the quality and yield of the fruits.
Irrigation
5% concentration of ekofertile® plant and 5% concentration of microfertile® plant (i.e. 5 liters of each product per 100 liters of solution with chlorine-free water) applied 3-4 times at regular intervals. Against frost 10% microfertile® plant approx. 24 hours before frost.
Foliar Application:
10% concentration of ekofertile® plant and 5% concentration of microfertile® plant (means 10 and 5 liters of each product per 100 liters of solution with chlorine-free water) at regular intervals of approximately 2 weeks.
Foliar Application
To protect against frost (increase of systemic resistance – users report about efficiency on different crops down to minus 4, 5 and 6°C) and to improve photosynthesis, apply a 10% concentration (10 litres of microfertile® plant per 100 litres of solution with chlorine-free water) by spraying over the entire surface on leaves, flowers and buds at least 24 hours before the expected frost (the effect lasts up to 10 days; note that wind increases the plants´ perceived cold).
Antifrost proteins are then converted into oils, vitamins and proteins, increasing the quality and yield of the vine.
Application Results
